Skip to content
pointMoA
plen

Zeroing target

Zeroing at 100 m but the range only has a 25 m lane? This target shows where the bullet should land at the shorter distance so that the zero holds at the intended one. The point of impact is calculated by the same engine as the calculator.

Target data
pointMoAZEROING TARGETA4 - scale 1:1 - p. 1/2PCPTPT: 2,1 cm ponizej PC, w osi PCAxis distance: 25 mFirearm: .308 Winchester (.308 Winchester) - Optic: 0.10 MRAD, axis 50 mm over the bore - Ammunition: .308 WinchesterBullet mass: 168.0 gr, V0 = 780.0 m/s - BC: 0.243 (G7) - Target zero: 100 mGrid every 1 cm. Full instructions on page 2.55551010CONTROL LINES: horizontal 180 mm, vertical 240 mm (between the end ticks).Print at 100% scale - turn off "fit to page". Tolerance +/-0.5 mm.

Lane distance25 m

Vertical offset-21.4 mm

Horizontal offset0 mm

The preview is **scaled to the window** — do not measure it with a ruler. For shooting, download the PDF: it is 1:1 and carries control lines to check after printing.

Do not print this page from the browser — the scale will be arbitrary. Download the PDF and print it at 100% with “fit to page” switched off.

The file is the same sheet the pointMoA app prints — grid, control lines and a second page with the data. Print at 100% scale.